Simulasi transfer panas pada dinding dengan software Therm 7.7
Main Article Content
Abstract
Heat transfer simulation on the wall with Thermal 7.7 software
Counting the heat transfer in building is not something complicated. There are quite a lot of computer simulation software offering precision and variants which meet the needs of the users. Software Therm offers one advantage, which is user-friendly, and can be used for a real plane in building design and can even be used to count the heat transfer in a building map. The difficulty in using this application is the limitation in building material library which is suitable for daily building materials in Indonesia. However, this software allows the users to add building material library by filling in with building material value in connection with simple therm. This research is based on the internal research funded by Soegijapranata Catholic University, the aim of which is to analyze the field of wall materials by utilizing Software Therm with real heat transfer simulation and accurate calculation by mapping plane wall cutting. This research is based on the internal research funded by Soegijapranata Catholic University, the aim of which is to analyze the field of wall materials by utilizing Software Therm with real heat transfer simulation and accurate calculation by mapping plane wall cutting. Descriptive research design is applied to describe the heat transfer through walls by using software Therm and the effects of the heat transfer toward the inside room so that it can provide positive response to anticipate thermal effects entering the building. The finding of this research is expected to be able to become the basis for building design which must give special attention to the direction of building orientation so that the heat transfer of the effects of sunlight toward the wall can be found and be wisely anticipated.
© 2019 Leonardus Murialdo Fransiskus Purwanto
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Irsyad, M., A. D. Pasek, Y. S. Indartono, and A. W. Pratomo. 2017. ‘Heat Transfer Characteristics of Building Walls Using Phase Change Material’. In IOP Conference Series: Earth and Environmental Science. https://doi.org/10.1088/1755-1315/60/1/012028.
Kushwah, Anand, Krishna Dutta Pandey, Ankur Gupta, and Mr Gaurav Saxena. 2017. ‘Thermal Modeling of Heat Exchanger: A Review’. International Journal of Advance Research in Engineering Science & Technology.
Lee, Kyoung Ok, Mario A. Medina, and Xiaoqin Sun. 2016. ‘Development and Verification of an EnergyPlus-Based Algorithm to Predict Heat Transfer through Building Walls Integrated with Phase Change Materials’. Journal of Building Physics. https://doi.org/10.1177/1744259115591252.
Purwanto, L. M. F. 2007. Arsitektur Tanggap Lingkungan. Semarang: Penerbit Universitas Katolik Soegijapranata.
Purwanto, L. M.F. 2006a. Arsitektur Tropis Dalam Penerapan Desain Arsitektur. Semarang: Penerbit Universitas Katolik Soegijapranata.
———. 2017. Fisika Bangunan. Semarang: cV. Tigamedia Pratama.
Purwanto, L. M.F., and Karsten Tichelmann. 2018. ‘Solar Heat Transfer in Architectural Glass Facade in Semarang Indonesia’. A/Z ITU Journal of the Faculty of Architecture. https://doi.org/10.5505/itujfa.2018.50465.
Purwanto, L M F. 2006b. ‘PENGARUH BENTUK ATAP BANGUNAN TRADISIONAL TERMAL BANGUNAN ( Sebuah Pencarian Model Arsitektur Tropis Untuk Aplikasi Desain Arsitektur )’. DIMENSI (Jurnal Teknik Arsitektur).
Purwanto, LMF, Hermawan, and Ridwan Sanjaya. 2006. ‘PENGARUH BENTUK ATAP BANGUNAN TRADISIONAL DI JAWA TENGAH UNTUK PENINGKATAN KENYAMANAN (Sebuah Pencarian Model Arsitektur Tropis Untuk Aplikasi Desain Arsitektur)’. DIMENSI (Jurnal Teknik Arsitektur).
Urzędowski, Arkadiusz, Joanna Styczeń, and Dorota Wójcicka-Migasiuk. 2017. ‘ANALYSIS OF THERMAL PROPERTIES AND HEAT LOSS IN CONSTRUCTION AND ISOTHERMAL MATERIALS OF MULTILAYER BUILDING WALLS’. Advances in Science and Technology Research Journal. https://doi.org/10.12913/22998624/69418.